Search This Supplers Products:Filter mediumMetal fiber feltSintered wire meshSintered filterMesh filterPleated filters
What's Sany pleated stainless steel sintered mesh filter？
10inch Stainless Steel Pleated Filter Cartridge
This kind of filter element is made of sintered metallic fiber felt and multi-layer wire mesh.It has porous structure,high strength,good air permeability,porosity,excellent dust holding.It's widely used in polymer,synthetic fiber and chemical production.
Technical data:
Specification | |
Filter rating | 5-60um(fiber felt) 1-300μm(wire mesh) |
Working pressure | Max 30 MPa |
Working medium | Water,Hydraulic oil,Polymer,Chemicals,Petrochemicals |
Temperature | Unfer 480℃ |
Material | SS sintered fiber felt, SS woven wire mesh |
O-Ring | NBR, fluororubber |
Application | water filter |
Dirt holding capacity | 16.9~41mg/cm2 |
10inch Stainless Steel Pleated Filter Cartridge Product Image:
Sany pleated stainless steel sintered mesh filter production processes
1> The multilayer stainless steel woven wire mesh is sintered by high temperature to be a new filter screen.
2> The new filter screen is made into a filter cartridge by pleated.
3> Then Weld star tray at both ends of the filter cartridge.
Sany pleated stainless steel sintered mesh filter technical parameters
Material | Stainless steel 304 or 316L |
Mesh layers | Standard 3 layers sintered wire mesh |
Microm rate | 5um-200un |
Pleat height | Less than 150mm |
Connectors | Star tray |
If you want to know more products please click the link below